ALL2272 QIG
3
ALLNET GmbH © 2009 –
www.allnet.de
Install the hardware and connect all cables
b. Connect all cables
b1. Without Power over Ethernet (PoE) connection
1. Connect the power adaptor to the IP Camera.
2. Using a standard RJ-45 network cable, connect the IP
Camera to a normal Hub / Switch / Router.
b2. Power over Ethernet (PoE)
1. Using a standard RJ-45 network cable, connect the IP
Camera to a PoE-enabled Hub / Switch / Router
b3. Wireless connection
1. Connect the power adaptor to IP Camera.
2. Connect to Wi-Fi
Microsoft OS:
Use the software CD to install Intelligent IP Installer
Power on your PC and insert the CD-ROM. The setup page will show up automatically. Please follow those
steps to install the firmware.
b 2
b 1
b 3
Select
“Intelligent IP Installer” and follow the installation process to complete the installation.