1. Introduction
The purpose of this document is to present the details on how to use the Wireless AP. There are three
interfaces in the AP: Wireless, Ethernet and Powerline. As Figure 1 shows, you can use other Powerline
Bridge(s) to connect the AP through power line.
Figure 1.
Powerline Access Point application example
2. System Requirements
An IBM PC compatible, with
：
Processor: Pentium or higher, clock rate 2.6GHz or above recommended
Operating System : Windows XP/Vista/7
Memory: 128 MB or more
Browser: Microsoft Internet Explorer 6.0 or higher version
, or Firefox 1.0
.
3. Configuration
In first time, please connect the AP with a PC via Ethernet port or PLC bridge. Then set your PC’s IP to 192.168.1.10 or
other in the same subnet 192.168.1.x except “192.168.1.2” .
