Allnet ALL0558N User Manual Download Page 51

Page: 51 / 88

ALL0558N

User’s Manual

8 LAN Setup

This section will guide you to setup the Local Area Network (LAN) settings

8.1 IP Settings

This section is only available for

Non-Router Mode

. IP Settings allows you to configure the IP

settings of the ALL0558N.

IP Network Setting

Select Radio button for

Obtain an IP address automatically

Specify an IP address

IP Address

Specify LAN port IP address.

IP Suet Mask

Specify Subnet Mask.

Default Gateway

Specify Default Gateway.

Primary DNS

Specify Primary DNS.

Secondary DNS

Specify Secondary DNS.

Accept / Cancel

Press

Accept

to confirm the changes or

Cancel

to return

previous settings.

Please make note of the following:

1. Obtain an IP address automatically is not a DHCP server. This setting allows the
ALL0558N to automatically request an IP address when it is connected to a device which
has a DHCP server.

Summary of Contents for ALL0558N

























































































Search results

Summary of Contents for ALL0558N

Reviews:

Brands by name

Popular brands

Allnet ALL0558N, User Manual

Search results

Summary of Contents for ALL0558N

Reviews:

Brands by name

Popular brands