3. Connect the DSL or Cable modem to the WAN port on
the Wireless Router. Use the cable supplied with your
DSL/Cable modem. If no cable was supplied, use a stan-
dard cable.
4. Power on the Cable or DSL modem.
Connect the supplied power adapter to the Wireless
Router and power up.
5. Check the LEDs
•
The
Power
LED should be ON.
•
For each LAN (PC) connection, the
LAN
LED should be
ON (provided the PC is also ON.)
•
The
WAN
LED should be ON.
•
The
WLAN
LED should be ON
o
Configuration
1. Start your PC. If it is already started, restart it.
It will then obtain an IP Address from the Wireless
Router's DHCP Server.
2. Start your WEB browser. In the
Address
box, enter the
following:
HTTP://192.168.0.1
3. When prompted, use the following username and pass-
word.
•
User name:
admin
•
Password:
password
4. Click
Setup Wizard
on the menu.
5. Step through the Wizard until finished. Refer to the data
from your ISP, and the table below, to ensure your
choices are correct.
Page
2
