Wireless N Extender
Version 1.0
5
LABEL
STATE
DESCRIPTION
POWER LED
On
– Solid Green
Off
Device is powered ON
Device is powered OFF
ETHERNET LED
On
– Solid Green
On
– Blinking Green
Off
Ethernet device is
connected
Indicates LAN activity
No Ethernet device
connected
WIRELESS LED
On
– Solid Green
On
– Blinking Green
Off
Wireless interface is UP
Indicates wireless activity
Wireless interface is DOWN
WPS LED and BUTTON
On
– Solid Green
On
– Blinking Green
Off
WPS association is
successful
WPS authentication on
going
WPS disabled
Bottom Panel
LABEL
DESCRIPTION
RESET
Press the Reset button for 5 seconds to restore the
device to default factory settings
ETHERNET PORT
Connect to computers/Ethernet devices
Configuring the Device
Before moving ahead to setup your wireless extender, it is often a good idea to identify the areas
where you have good wireless reception and weak or no wireless signal at all. Based from this
assessment you may place the wireless extender in between a location where you have good
wireless reception and where you have poor wireless coverage. The illustration below is an
example of a network diagram.