manualshive.com logo in svg

Allnet ALL0235mini, User Manual

Share
Download
Allnet ALL0235mini User Manual Download Page 9

 

9

Chapter 2

 

Installation and Basic Configuration   

This  chapter  will  guide  you  steps  by  steps  to  install  and  configure  the  Wireless  Router.

 

We 

suggest you go over the whole chapter first and then do more advanced operation. 

2.1  Operation Mode 

In this device, there are two modes for your selection:   

 

AP mode 

 

Router mode 

Different mode functions different. You can glide the slide switch on the left side of the device to 

the left hand side (AP mode) or right hand side (Router mode) to choose the mode you want.   

Before installation, please choose an operation mode first and then go on other configurations. 

2.2  Connect This Router to Your Network 

Steps to build up the network: 

1.  Connect the phone line from the wall socket to the line-in port on the ADSL modem, or the 

coaxial cable to the line-in port on the cable modem.   

2. 

A---Router  Mode:

  Connect  the  ADSL  or  cable  modem  to  the  Ethernet  WAN  port  on  the 

back of the Wireless Router by using the UTP cable. 

B---AP Mode:

 Connect a router to one of the two ports on the back of this device by using 

the UTP cable. 

3.  Plug-in the USB cable to the modem and turn on the power. Install the Ethernet card into the 

computer by referring to the User Guide that came with the card. 

4.  Connect the computer to the Wireless Router by using standard twisted-pair Ethernet cable 

from the  computer’s  Ethernet card  to  a  10/100Mbps  Ethernet  LAN  port  on  the  back  of the 

Wireless Router. (In AP mode both the ports can be used as LAN ports) 

5.  Plug  the  USB  cable  (mini-USB  cable)  into  the  router  port  and  put  the  other  end  into  an 

electric service outlet (5V/1A DC). 

Summary of Contents for ALL0235mini


















































Reviews:

No comments

Brands by name

Popular brands

Load more brands