Allnet ALL-WAP02850N User Manual Download Page 62

Page: 62 / 89

ALL-WAP02850N

User’s Manual

8.5

Backup/Restore

This page allows you to save the current device configurations. When you save the
configurations, you also can reload the saved configurations into the device through
the

Restore Saved Settings from A File

section. If extreme problems occur, or if you

have set up the ALL-WAP02850N incorrectly, you can use the

Factory Default

button

in the

Revert to Factory Default Settings

section to restore all the configurations of the

ALL-WAP02850N to the original default settings.

Backup/Restore

Save A Copy of
Current Settings

Click

Backup

to save the current configured settings.

Restore Saved
Settings from A File

To restore settings that have been previously backed up, click

Browse

, select the file, and click

Restore

Revert to Factory
Default Settings

Click

Factory Default

button to restore the ALL-WAP02850N to its

factory default settings.

Summary of Contents for ALL-WAP02850N


























































































Search results

Summary of Contents for ALL-WAP02850N

Reviews:

Brands by name

Popular brands

Allnet ALL-WAP02850N, User Manual

Search results

Summary of Contents for ALL-WAP02850N

Reviews:

Brands by name

Popular brands