Allnet ALL-HS02530 User Manual Download Page 123

Page: 123 / 132

ALL-HS02530 Hotspot in a Printer

122

ALLNET GPL Code Statement

This ALLNET product includes software code developed by third parties, including

software code subject to the GNU General Public License ("GPL") or GNU Lesser

General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and

information on obtaining access to the GPL code and LGPL code used in this product,

are available to you at:

http://www.allnet.de/gpl.html

The GPL code and LGPL code used in this product is distributed WITHOUT ANY

WARRANTY and is subject to the copyrights of one or more authors. For details, see

the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.

Written offer for GPL and LGPL source code

Where such specific license terms entitle you to the source code of such software,

ALLNET will provide upon written request via e-mail and/or traditional paper mail

the applicable GPL and LGPL source code files via CD-ROM for a nominal cost to

cover shipping and media charges as allowed under the GPL and LGPL.

Please direct all inquiries to:

Email:

[email protected]

Snail Mail:

ALLNET GmbH

Maistraße 2

82110 Germering

GNU GENERAL PUBLIC LICENSE

Version 2, June 1991

Summary of Contents for ALL-HS02530





































































































































Search results

Summary of Contents for ALL-HS02530

Reviews:

Allnet ALL-HS02530, User Manual, Page: 123 / 132

Search results

Summary of Contents for ALL-HS02530

Reviews: