Allnet ALL 1685 Quick Setup Manual Download Page 6

Product installation guide 

 

Important:  

Do not plug the device into a power strip or surge protector because these devices may consist 

of filter and impair signal.  Also avoid plugging the device right next to noisy sources such as cell 

phone charger, halogen light, noisy desktop computer, vacuum cleaner, etc. Both cases result in 

poor transmission speed. 

 

To install for the PC local Powerline network 

1. 

Use the supplied Category 5 Ethernet cable to connect the ALL1685 and your PC’s Ethernet port. 

2. 

Plug the Ethernet Bridge ALL1685 to outlet. 

3. 

You can repeat steps 1 and 2 for connecting many other links depending on your needs

.

 

4. 

The LINK and LINK/ACT LED indicator light up when you complete the above connection. 

5. 

The ACT LED indicator starts blinking when the data communication proceeds on power line. 

6.     The COL LED indicator flashes when there is a Powerline communication collision. 

 

To share a xDSL or cable modem with Internet access service

 

1. 

Connect one ALL1685 to the broadband router  

z

 

Plug the ALL1685 into an AC outlet. 

z

 

Plug the provided Ethernet cable into the RJ45 connector of the ALL1685 and plug the other end of the 

cable into an available Ethernet port of the Router. 

2. 

Connect the other ALL1685s to the PC(s) to share the Internet access 

z

 

Plug the Bridge ALL1685 into an AC outlet. 

z

 

Plug the provided Ethernet cable into the RJ45 connector of the bridge ALL1685 and plug the other end 

of the cable into Ethernet port on the PC. 

 

As wireless AP (Access Point) Extender 

1. 

Connect one Ethernet Bridge ALL1685 to the broadband router  

z

 

Plug the ALL1685 into an AC outlet. 

z

 

Plug the provided Ethernet cable into the RJ45 connector of the Bridge ALL1685 and plug the other end 

of the cable into an available Ethernet port of the router. 

2. 

Connect the other Ethernet Bridge ALL1685 to the AP 

z

 

Plug the BridgeALL1685 into an AC outlet. 

z

 

Plug the provided Ethernet cable into the RJ45 connector of the bridge ALL1685 and plug the other end 

of the cable into the Ethernet port on the AP. 

ALL1685              ©

 2005 . All rights reserved.                   Page 6 

Reviews: