Allnet 200625, Manual

Page: 14 / 40

ALLNET GmbH
ComputersystemeMaistraße 2
| D-82110 Germering
+49 (0)89 894 222 - 46 brand@allnet.de
In case of problems/ FAQ
o
The display does not start: Please check the power supply. Is the cable of the power supply unit
plugged into the device correctly? Please also check the cold-device plug in the power supply
unit. If power is supplied via PoE (Power over Ethernet): Please check the RJ45 connector if it is
clicked in correctly. The cable should be at least Cat5e for displays up to 15 inches and Cat6 for
displays 15 inches and above to transmit the power. Please check if the switch provides enough
power and if the display is connected to a PoE port. Only standard compliant PoE may be used.
With passive PoE your display can be destroyed. There is no warranty for this.
o
I can't get an Ethernet/Internet connection: Please turn off the WLAN. Turn the Ethernet
connection off and on again and check the IP address settings to see if you have set a static IP.
The WLAN connection and Bluetooth should always be set to disabled when not in use to avoid
problems.
o
Updates are not automatic and are available via OTA (Over the Air). If you have any questions,
please contact the support.