4
3
1. Installing the Rubber Pads
2. For the model AS01K installation
(Assembly based on the accessories selected by user.)
Attach the power socket to the back of column using the appropriate screws. Tighten all screws with a
phillips screwdriver.
P-G
AS02H
AS02
AS03V/AS02P
AS02R
CPU holder (x1)
T-A
Package P
laptop cabinet (x1)
T-D
support rod (x2)
T-F
camera shelf (x1)
T-G
connecting piece (x1)
T-B
silicone pad (x8)
P-C
DVD shelf (x1)
T-C
Package P
key (x1)
P-F
M6x8 (x4)
P-D
AS01K
power socket (x1)
T-H
M6x8 (x4)
P-A
4mm Allen key (x1)
P-B
AS03V only
D6 washer (x4)
P-E
connecting piece (x1)
T-E
ST4.8x9.5 (x4)
P-G
The following accessories are optional.
3a. For Concrete Floor Mounting
60mm
(
2.4"
)
62mm
(
2.4"
)
ø12
m
m
(
ø
1/
2 "
)
T-H
• Lift the steel base by grasping the cable ties.
• Peel off the backing paper from the rubber pads and stick the rubber
pads on to the steel base.
Mark the exact location of mounting holes and pre-drill these mounting holes with a 12mm drilling bit to
at least 62mm in depth. Remove the dust in the holes.
First tighten the iron expansion bolts with an Allen key,
and then loosen the iron expansion bolts in order to
separate the bolts and the expansion tubes.
• Attach the connecting plate to the bottom of the column using the appropriate
screws. Tighten all screws with an Allen key.
• Insert an expansion tube into each of these holes. Using the bolts mount the
column to the floor. Tighten all screws with an Allen key.
A
G
I
M
M
T
T
R
H