Allied HO-PAC 1000 Series, Technical Manual, Page: 33 / 50

1000 Series Ho-Pac
SECTION 12.0
LIFTING & TRANSPORT
! WARNING !
Do not lift Ho-Pac by the mounting pins.
The Ho-Pac may shift and cause damage
or personnel injury.
If the Ho-Pac is to be transported
independently of the carrier;
1. Remove all loose debris from Ho-Pac.
2. If the swivel assembly is installed, lock
swivel position with bolt.
3. Follow removal instructions in Section
8.2.
4. Secure hoses to unit to avoid accidental
damage.
5. Lift Ho-Pac at approved lift points only
with appropriate lifting equipment. See
diagram in Section 4.4.
6. Adequately stabilize and secure Ho-Pac
for transport.
If the Ho-Pac is transported while installed
on the carrier:
1. Remove all loose debris from Ho-Pac.
2. If the swivel assembly is installed, lock
swivel position with bolt.
3. Secure hoses to unit to avoid accidental
damage.
4. Inspect the mounting pins and hardware
for damage and integrity.
5. Transport carrier in accordance with
carrier manufacturer’s recommendations.
29