Specifications
35
Manta Technical Manual V7.9.0
Spectral response plots
Specifications common to all models
Absolute QE plots for CMOSIS/ams CMOS sensors
The curves in the absolute QE plots shown in this chapter are from the sensor
manufacturer data sheet.
The information was correct at the time of publishing. Sensor specifications may
change without notice.
Wavelength
The wavelength range in the absolute QE plots is based on the information
available in the sensor manufacturer data sheet at the time of publishing. Many
color sensors are documented by the sensor manufacturer only for wavelengths
from 400 nm to 700 nm.
For additional wavelength information, contact the sensor manufacturer.
For select CCD models
Sony provides relative response curves in their sensor data sheets. To create the
spectral response plots shown in this chapter, the relative response was adjusted
as per three measured QE values (@ 448 nm, 529 nm, 632 nm) for color sensors
and one measured QE value (@ 529 nm) for monochrome sensors.
Feature
Specification
Lens mount
Default: C-Mount
Optional: See the
Modular Concept
Housing
Default: Straight view
Optional: See the
Modular Concept
Opto-isolated I/Os
2 inputs, 2 outputs
RS232
1 TxD, 1 RxD
Operating temperature
+5°C to +45°C ambient temperature (without condensation)
Storage temperature
-10°C to +70°C ambient temperature (without condensation)
Operating humidity
20 to 80% non-condensing
Power requirements
8 to 30 VDC; PoE
Interface
IEEE 802.3 1000BASE-T (Gigabit Ethernet), IEEE 802.3af (PoE)
Interface standard
GigE Vision® Standard V1.2
Camera control standard
GenICam SFNC V1.2.1
Table 4: Specifications common to all Manta models
