Allied Vision GT1380, Technical Manual

Page: 177 / 214

Mechanical dimensions
177 Prosilica GT Technical Manual V3.2.0
TFL-Mount
Calibration variation
Flange focal distance is the optical distance from the lens mounting flange to
image sensor die.
Figure 110: TFL-Mount flange focal distance
Mount Calibration variation Flange focal distance
C-Mount Not available See Figure 106
EF-Mount < 70 µm (0.3 degrees) Z-tilt and ±10 µm 44.00 mm
F-Mount Not available 46.50 mm
M42-Mount Not available 45.46 mm
M58-Mount Not available See Figure 109
TFL Mount Not available See Figure 110
Table 83: Calibration variation from standard flange focal distance
A
A
Image sensor die
SECTION A-A
Flange focal distance
Flange focal distance:
Monochrome cameras: 17.526 mm nominal, 17.126 minimum, 18.526 mm maximum
Color cameras: 17.892 mm nominal, 17.126 mm minimum, 18.526 mm maximum