Bonito Technical Manual
V2.4.0
38
Camera Link interface (01-04 or
Dual channel, reduced line length
The charts below illustrate the Camera Link timing for dual channel mode (com-
patibility mode with reduced line length,
S=3
), in continuous mode (
M=0
). The
frame gap may vary in other trigger modes. Additionally, the number of active
lines per frame can be configured by the user (parameter
N
).
Note
The diagrams displayed are not applicable for the
Bonito CL-
400B/C 200fps
cameras.
Figure 21: Line timing for dual channel mode (compatibility mode with reduced line length,
S=3
)
Figure 22: Frame timing for dual channel mode (compatibility mode with reduced line length,
S=3
)
