Basic parameters and commands
Pearleye Technical Manual
V2.2.0
45
Software version and correction data
information (V)
The command
V=1
displays information about the correction data installed in
the non-volatile memory. The current firmware version and also the serial num-
ber of the camera are output.
Current parameter settings (Y)
The command
Y=1
shows the actual set parameter values.
GigE feature name (CameraSpecialFeatures)
Feature Visibility Description
SensorTemperatureState
Expert
Camera sensor temperature
state.
0 = The sensor temperature is
OK.
1 = The sensor temperature is
outside the optimum range.
QuerySensorTemperatureState
Expert
Query camera sensor tempera-
ture state.
(T = 1 command)
ShutterTemperatureValue
Beginner
Shutter temperature value in
degree Celsius.
QueryShutterTemperatureValue
Beginner
Query camera shutter tempera-
ture state.
(T = 2 command)
Table 15: GigE feature: Sensor temperature state
Note
This function is not available as GigE Vision feature.
Note
This function is not available as GigE Vision feature.
