Allied Vision Technologies F-131B, Technical Manual, Page: 18 / 183

Specifications
4.5 MF-080B (-30 fps*)
Specification
Image device 1/3 " (diag. 6 mm) type progressive scan SONY IT CCD
Effective Picture Elements 1032 (H) x 778 (V)
Lens Mount
C-mount: 17.526 mm (in air);
∅
25.4 mm (32 T.P.I.)
Mechanical Flange Back to filter distance: 8.2 mm, CS-mount on
demand
Picture Sizes 1024 x 768 pixels (Format_1) supporting all smaller fixed formats;
1032 x 778 (Format_7 Mode_0)
516 x 778 (Format_7 Mode_1);
1032 x 388 (Format_7 Mode_2);
516 x 388 (Format_7 Mode_3)
Cell Size 4.65 µm x 4.65 µm
ADC 12 Bit
Data Path 8/10 Bit
Frame rates 3.75 Hz; 7.5 Hz; 15 Hz; 30 Hz* ; up to 20 (30*) Hz in Format_7
Gain Control Manual: 0–24 dB (0.035 dB/step); Auto gain (select. AOI)
Shutter Speed 20 …67.108.864 µs (~67s); Auto shutter (select. AOI)
External Trigger Shutter Trigger_Mode_0, Trigger_Mode_1, Advanced feature:
Trigger_Mode_15 (bulk); image transfer by command; Trigger delay
Internal FIFO-Memory Up to 7 frames
# Look Up Tables One, user programmable (10 Bit -> 8 Bit); Gamma (0.45)
Smart Functions Real time shading correction; image sequencing, two configurable
inputs, two configurable outputs, image mirror (L-R
↔
R-L), binning,
serial port (IIDC v. 1.31)
Transfer Rate 100 Mb/s, 200 Mb/s, 400 Mb/s
Digital Interface IEEE 1394 IIDC v. 1.3
Power Requirements DC 8 V – 36 V via IEEE 1394 cable or 12-pin HIROSE
Power Consumption Less than 3 Watts (@ 12 V d.c.)
Dimensions 58 mm x 44 mm x 29 mm (L x W x H); without tripod and lens
Mass <120 g (without lens)
Operating Temperature +5 – +45 ° Celsius
Storage Temperature -10 – +60 ° Celsius
Regulations EN 55022, EN 61000,EN 55024,FCC Class A, DIN ISO 9022
Options Removable IR-cut-filter, host adapter card, locking IEEE-1394 cable,
API (FirePackage), TWAIN (WIA)- and WDM stream driver
Table 6: Specification MF-080B
The design and specifications for the products described above may change without notice.
*: Variant: F-080-30 fps only.
This variant offers higher speed at a slight expense in image quality.
MARLIN Technical Manual
Page 18