Allied Telesis z AT-8700XL Series User Manual Download Page 3

Contents

CHAPTER 1

Introduction

Why Read this User Guide? ............................................................................... 5
Where To Find More Information  ...................................................................... 6
Technical support .............................................................................................. 7
Features of the AT-8700XL Series Switch  ........................................................... 7
Warning about FLASH memory  ......................................................................... 9

CHAPTER 2

Getting Started with the Command Line Interface (CLI)

This Chapter  ................................................................................................... 11
Connecting a Terminal or PC ........................................................................... 12
Terminal Communication Parameters  .............................................................. 12
Logging In  ...................................................................................................... 13
Assigning an IP Address  .................................................................................. 13
Assigning an IP Address  .................................................................................. 14
Setting Routes  ................................................................................................ 15
Changing a Password  ..................................................................................... 16
Choosing a Password ...................................................................................... 16
Using the Commands  ..................................................................................... 17
Getting Command Line Help  .......................................................................... 18
Setting System Parameters  .............................................................................. 18

CHAPTER 3

Getting Started with the Graphical User Interface (GUI)

This Chapter  ................................................................................................... 21
What is the GUI?  ............................................................................................ 22
Accessing the Switch via the GUI  .................................................................... 22
Using the GUI: Navigation and Features  .......................................................... 32
Upgrading the GUI  ......................................................................................... 38
Troubleshooting .............................................................................................. 39

CHAPTER 4

Operating the switch

This Chapter  ................................................................................................... 45
User Accounts and Privileges ........................................................................... 45
Normal Mode and Security Mode  ................................................................... 47
Remote Management  ..................................................................................... 49
Storing Files in FLASH Memory ........................................................................ 49
Using Scripts ................................................................................................... 50
Loading and Uploading Files  ........................................................................... 52
Upgrading Switch Software  ............................................................................ 56
Using the Built-in Editor  .................................................................................. 60

Summary of Contents for z AT-8700XL Series


















































































Reviews: