C613-50170-01 Rev B
Command Reference for x510 Series
897
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
RIP C
OMMANDS
CLEAR
IP
RIP
ROUTE
clear ip rip route
Overview
Use this command to clear specific data from the RIP routing table.
Syntax
clear ip rip route {
<ip-dest-network/prefix-length>
|
static|connected|rip|ospf|invalid-routes|all}
Mode
Privileged Exec
Usage
Using this command with the
all
parameter clears the RIP table of all the routes.
Examples
To clear the route 10.0.0.0/8 from the RIP routing table, use the following
command:
awplus#
clear ip rip route 10.0.0.0/8
Parameter
Description
<ip-dest-network/
prefix-length>
Removes entries which exactly match this destination
address from RIP routing table. Enter the IP address and
prefix length of the destination network.
static
Removes static entries from the RIP routing table.
connected
Removes entries for connected routes from the RIP routing
table.
rip
Removes only RIP routes from the RIP routing table.
ospf
Removes only OSPF routes from the RIP routing table.
invalid-routes
Removes routes with metric 16 immediately. Otherwise,
these routes are not removed until RIP times out the route
after 2 minutes.
all
Clears the entire RIP routing table.
