C613-50170-01 Rev B
Command Reference for x510 Series
2751
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
T
RIGGER
C
OMMANDS
SHOW
TRIGGER
show trigger
Overview
This command displays configuration and diagnostic information about the
triggers configured on the device. Specify the
show trigger
command without
any options to display a summary of the configuration of all triggers.
Syntax
show trigger [<
1-250
>|counter|full]
Mode
Privileged Exec
Example
To get summary information about all triggers, use the following command:
awplus#
show trigger
Parameter
Description
<
1-250
>
Displays detailed information about a specific trigger, identified by its
trigger ID.
counter
Displays statistical information about all triggers.
full
Displays detailed information about all triggers.
Table 1:
Example output from the
show trigger
command
awplus#show trigger
TR# Type & Details Name Ac Te Tr Repeat #Scr Days/Date
---------------------------------------------------------------------------------
003 CPU (80% any) Busy CPU Y N Y 5 1 smtwtfs
005 Periodic (30 min) Regular status check Y N N Continuous 1 -mtwtf-
007 Memory (85% up) High mem usage Y N Y 8 1 smtwtfs
011 Time (00:01) Weekend access Y N Y Continuous 1 ------s
013 Reboot Y N Y Continuous 2 smtwtfs
017 Interface (vlan1 ... Change config for... Y N Y Once 1 2-apr-2016
019 Ping-poll (5 up) Connection to svr1 Y N Y Continuous 1 smtwtfs
---------------------------------------------------------------------------------
Table 2:
Parameters in the output of the
show trigger
command
Parameter
Description
TR#
Trigger identifier (ID).
Type &
Details
The trigger type, followed by the trigger details in brackets.
Name
Descriptive name of the trigger configured with the
command.
Ac
Whether the trigger is active (Y), or inactive (N).
