C613-50170-01 Rev B
Command Reference for x510 Series
267
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
S
YSTEM
C
ONFIGURATION
AND
M
ONITORING
C
OMMANDS
SHOW
ECOFRIENDLY
show ecofriendly
Overview
This command displays the switch’s eco-friendly configuration status. The
and
configuration status are shown in the
output.
Syntax
show ecofriendly
Mode
Privileged Exec and Global Configuration
Example
To display the switch’s eco-friendly configuration status, use the following
command:
awplus#
show ecofriendly
Output
Figure 7-6:
Example output from the
show ecofriendly
command
awplus#show ecofriendly
Front panel port LEDs normal
Energy efficient ethernet
Port Name Configured Status
port1.0.1 Port 1 lpi lpi
port1.0.2 lpi lpi
port1.0.3 lpi lpi
port1.0.4 off off
port1.0.5 lpi off
port1.0.6 Port 6 off off
port1.0.7 off -
port1.0.8 off -
port1.0.9 off -
port1.0.10 off -
...
Table 3:
Parameters in the output of the
show ecofriendly
command
Parameter
Description
normal
The eco-friendly LED feature is disabled and port LEDs
show the current state of the ports. This is the default
setting.
off
The eco-friendly LED feature is enabled and power to
the port LEDs is disabled.
normal
(configuration
overridden by eco
button)
The eco-friendly LED feature has been disabled with
the eco-switch button, overriding the configuration
set with the
show the current state of the ports.