Allied Telesis x330 Series, Installation Manual

Page: 86 / 126

Chapter 7: Installing x330-20GTX and x330-28GTX Switches on a Wall
86
Installation Guidelines
Wall installations of x330-20GTX and x330-28GTX Switches require the
AT-BRKT-J24 brackets kit. Refer to Figure 22 on page 53. The kit is sold
separately. You can install the switches with the front panels facing up, left
or right. Refer to Figure 49.
Figure 49. x330-20GTX and x330-28GTX Switches on a Wall
Do not install the switches with the front panels facing down. Refer to
Figure 50.
Figure 50. Unsupported Wall Installation
Here are the guidelines to installing switches on a wall:

You may install the switches on wooden or concrete walls.

If you are installing the switches on a wall with wooden studs, you
should install them on a plywood base. For more information, refer
to “Plywood Base for a Wall with Wooden Studs” on page 88.