Allied Telesis x330 Series, Installation Manual

Page: 72 / 126

Chapter 5: Installing the x330-28GTX Switch in an Equipment Rack
72
Introduction
The x330-28GTX Switch comes with two brackets for installing the device
in a standard 19-inch equipment rack. Refer to Figure 38. The brackets
and screws are shown in Figure 15 on page 47.
Figure 38. x330-28GTX Switch Installed in a Standard 19-inch Equipment
Rack
Note
You can install the x330-28GTX Switch in an equipment rack with
the brackets that come with the unit or with the RKMT-J13
equipment rack brackets kit, which is sold separately.