Allied Telesis x330 Series, Installation Manual

Page: 54 / 126

Chapter 2: Beginning the Installation
54
Installing the Switch on a Table
You can operate the switch on a table or desktop. Refer to Figure 23.
Figure 23. Switch Installation on a Table
The following guidelines are in addition to those in “Choosing a Site for the
Switch” on page 44:

Do not stack switches on a table.

Do not install the switch upside down on a table.

Do not install the switch vertically on a table.
Figure 24. Unsupported Table Installations
Warning
Switches should not be stacked on a table or desktop. They could
present a physical safety hazard should you move or replace
switches.

E91
Warning
The device is heavy. Use both hands to lift it. You might injure
yourself or damage the device if you drop it.

E94