Allied Telesis TQ5403, Installation Manual, Page: 61 / 82

TQ5403 and TQm5403 Wireless Access Points Installation Guide
61
LAN Ports Specifications and Pinouts
Port
Specifications
The access point port specifications are shown in Table 8.
Port Pinouts
The pin signal definitions for ports LAN1 and LAN2 are given here. Figure
26 illustrates the pin layout of the ports.
Figure 26. Pin Layout for RJ45 Connector on LAN Port
Table 9 lists the pin signals for ports operating at 10/100Mbps in the MDI
configuration.
Table 8. LAN Port Specifications
Connector Specification
Standards - LAN1 and LAN2 IEEE 802.3 (10Base-T)
IEEE 802.3u (100Base-TX)
IEEE 802.3ab (1000Base-T)
PoE standard - LAN1 only IEEE 802.3at (class 4)
Table 9. MDI Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-