Patch 86222-22 For Rapier Switches and AR800 Series Modular Switching Routers
21
Patch 86222-22 for Software Release 2.2.2
C613-10319-00 REV U
The default setting for the switch port parameter INFILTERING is now OFF,
as specified in IEEE802.1Q. A VLAN will still reject these packets if they are
not from valid VLAN member ports.
The IGMP snooping forwarding process now correctly selects outgoing
ports when DVMRP is managing the multicast routing information.
A configuration problem prevented trunking of gigabit ports at 100Mbit
speeds. This issue has been resolved. The A39 gigabit copper uplink
reverted to autonegotiation after a restart, even if it was configured to a
fixed speed. This issue has been resolved. When the port has been
configured for a fixed speed, the mode is now set to MDIX, not MDI.
When an M2 version of the AR020 PRI E1/T1 PIC was installed in a AR040
NSM it was not possible to select the T1 mode of operation regardless of the
jumper setting. This issue has been resolved.
A fatal error occurred when the firewall discarded disallowed multicast
packets. This issue has been resolved.
Features in 86222-08
Patch file details for Patch 86222-08 are listed in Table 14.
Patch 86222-08 includes all issues resolved and enhancements released in
previous patches for Software Release 2.2.2, and the following enhancements:
Tunnel creation failed when attempting to establish a point-to-point tunnel
from an ATR router (tunnel originator) to another vendor’s router. This
issue has been resolved.
PCR: 01246
Module: SWI
Network affecting: No
PCR: 01247
Module: IPG
Network affecting: No
PCR: 01248
Module: SWI
Network affecting: No
PCR: 01254
Module: PRI
Network affecting: No
PCR: 01256
Module: Firewall
Network affecting: No
Table 14: Patch file details for Patch 86222-08.
Base Software Release File
86s-222.rez
Patch Release Date
09-Nov-2001
Compressed Patch File Name
86222-08.paz
Compressed Patch File Size
291012 bytes
PCR: 01201
Module: L2TP
Network affecting: Yes
