16
Rapier Series Switch
C613-03020-00 REV K
•
Check “Diagnostics Messages” to display additional diagnostic
messages in the AT-TFTP window when debugging file transfers.
•
Choose whether AT-TFTP Server should respond to TFTP requests
received via IPv4 only, IPv6 only, or both IPv4 and IPv6.
•
Click the OK button when you finish.
3.
To download a file from AT-TFTP Server to your switch, at the switch’s
command line interface type the following command:
load method=tftp file=
filename
server=
ipadd
dest=flash
where
filename
is the name of the file to download and
ipadd
is the IP
address of the PC running AT-TFTP Server.
4.
TFTP requests are logged to the AT-TFTP Server main window. To save a
TFTP Server log, select Save As from the File menu.