OmniConnect / ISDN
User’s Manual
Page 12
Part number 613-10787-00
3.3.
Safety recommendations & maintenance
These guidelines must be followed to ensure safety and proper maintenance.
•
Do not attempt to remove the top or bottom covers, as you may be exposed
to a shock hazard. Only qualified service personnel should attempt to
remove the covers.
•
Do not place items on top of the OmniConnect/ISDN chassis as these items
may fall into the vents or cover them and prevent proper cooling of the
electronic devices.
•
Do not expose the OmniConnect chassis to rain or excessive moisture to
avoid the risk of shock or permanent damage to the set.
•
Consult a service technician if, after following all instructions in this
manual, the OmniConnect still does not operate correctly.
•
Keep the chassis area clear and dust-free during and after installation.
•
Do not use alcohol or any ammonia-based liquid to clean the OmniConnect
chassis. If necessary, wipe with a dry, lint free cloth.
h
WARNINGS!
Hazardous voltages are present in the BRI ISDN cable. If you detach the cable, detach
the end away from the OmniConnect first to avoid electrical shock. Hazardous voltages
are also present on the Printed Circuit Board (PCB) in the area of the BRI ISDN RJ-45
connector.
The installation and configuration of the system should not occur during periods of
lightning activity.
Users should not tamper with the ISDN connection.
Ports labeled “10Base-T” and “Console” are safety extra-low voltage (SELV) circuits.
SELV circuits should only be connected to SELV circuits. Do not connect the 10Base-T
connectors (RJ-45) to the BRI ISDN connection as this will result in permanent damage
to the OmniConnect access device.
Ultimate disposal of this product should be handled according to all relevant
international, federal, state, and local regulations.
3.4.
OmniConnect/ISDN package inspection
The OmniConnect/ISDN shipkit includes the following items:
•
One OmniConnect/ISDN (ST) or OmniConnect/ISDN (U) internet access
device
•
One AC power adapter
•
One OmniConnect/ISDN
CD-ROM
•
One OmniStart Quick Start Guide
