Allied Telesis MMC10G Series, Installation Manual

Page: 30 / 66

Chapter 1: Overview
30
SML Example Scenarios with Connection Down in Two Media
Converters Configuration
Following are example scenarios with two SML enabled media converters
connected back-to-back (bookend mode).
Figure 13 shows media converter and end node Link LED behavior with
SML enabled with a copper connection down between a media converter
and an end node.
Figure 13. SML with Copper Connection Down in Two Media Converters
Configuration
Figure 14 shows media converter and end node Link LED behavior with
SML enabled with a fiber connection down between two media converters.
Figure 14. SML with Fiber Connection Down in Two Media Converters
Configuration
MMC10GT/SP
End Node
Link LED Off
End Node
Link LED Off
MMC10GT/SP
Copper Link Fiber Link
LED Off LED Blinking
Fiber Link
LED Blinking
Copper Link
LED Blinking
Fiber Cable Copper Cable Copper Cable
Port 1
Port 2
Port 1
Port 2
MMC10GT/SP
End Node
Link LED Off
End Node
Link LED Off
MMC10GT/SP
Copper Link Fiber Link
LED Blinking LED Off
Fiber Link
LED Off
Copper Link
LED Blinking
Fiber Cable Copper Cable Copper Cable
Port 1 Port 2 Port 1
Port 2