manualshive.com logo in svg

Allied Telesis IX5-28GPX, Command Reference Manual, Page: 635 / 2231

Share
Download
Allied Telesis IX5-28GPX Command Reference Manual Download Page 635

C613-50152-01 Rev C

Command Reference for IX5-28GPX

635

AlliedWare Plus™ Operating System - Version 5.4.7-0.x

P

OWER

 

OVER

 E

THERNET

 C

OMMANDS

POWER

-

INLINE

 

MAX

See the 

LLDP Feature Overview and Configuration Guide

 for information about 

power monitoring at the PD.

Note the difference in power supplied from the PSE to the power available at the 
PD due to line loss.

See the 

PoE Feature Overview and Configuration Guide

 for further information 

about the difference between the power supplied from the PSE and the power 
available at the PD.

Examples

To set the maximum power supplied to ports in the range port1.0.1 to port1.0.4 to 
6450mW per port, use the following commands:

awplus# 

configure terminal

awplus(config)# 

interface port1.0.2-port1.0.4

awplus(config-if)# 

power-inline max 6450

To clear the user-configured maximum power supplied to port1.0.1, and revert to 
using the default maximum power, use the following commands:

awplus# 

configure terminal

awplus(config)# 

interface port1.0.1

awplus(config-if)# 

no power-inline max

Related 

Commands

show power-inline interface

show running-config

 power-inline

awplus#configure terminal

awplus(config)#interface port1.0.1

awplus(config-if)#power-line max 5300

% The maximum power has been rounded to 5450mW in hardware.

Summary of Contents for IX5-28GPX
























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments