IS230-10GP Industrial layer 2 Switch Web User Guide
33
The following table describes the items in Figure 4.
Logging Message
The Logging Message Filter page allows you to enable the display of
logging message filter.
To access this page, click
Monitoring
>
Logging Message
.
Figure 5. Monitoring > Logging Message
The following table describes the items in Figure 5.
Table 1. Device Information
Item
Description
System Name
Click
Switch
to enter the system name: up to 128 alphanumeric char-
acters (default is Switch).
System Location
Click
Default
to enter the location: up to 256 alphanumeric characters
(default is Default).
System Contact
Click
Default
to enter the contact person: up to 128 alphanumeric
characters (default is Default).
MAC Address
Displays the MAC address of the switch.
IP Address
Displays the assigned IP address of the switch.
Subnet Mask
Displays the assigned subnet mask of the switch.
Gateway
Displays the assigned gateway of the switch.
Loader Version
Displays the current loader version of the switch.
Loader Date
Displays the current loader build date of the switch.
Firmware Version
Displays the current firmware version of the switch.
Firmware Date
Displays the current firmware build date of the switch.
System Object ID
Displays the base object ID of the switch.
System Up Time
Displays the time since the last switch reboot.
Table 2. Logging Message
Item
Description
Target
Click the drop-down menu to select a target to store the log mes-
sages.
n
Buffered: Store log messages in RAM. All log messages are
cleared after system reboot.
n
File: Store log messages in a file.
Summary of Contents for IS230-10GP
