manualshive.com logo in svg

Allied Telesis IS230-10GP, Web User Manual

Share
Download
Allied Telesis IS230-10GP Web User Manual Download Page 118

IS230-10GP Industrial layer 2 Switch Web User Guide

119

Profile Target Mail Settings Window

The Profile Target Mail Settings page allows you to select the Profile ID for 
the Target Mail (input mail address) for the listed profile.
To access this page, click 

Management > SMTP Client > Profile 

Settings > Profile Target Mail Settings

.

Figure 104. Management > SMTP Client > Profile Settings > Profile Target 

Mail Settings

The following table describes the items in Figure 104.

The 

Profile Information 

settings in the ensuing table are informational 

only: 

Profile ID

 (click the drop-down menu to select a profile ID), Server 

IP, Server Port and Sender Mail Address.

Sending Message

The Sending Message page allows you to setup the log message for use 
with the SMTP client.
To access this page, click 

Management

 > 

SMTP Client

 > 

Sending 

Message

.

Figure 105. Management > SMTP Client > Sending Message

Table 100. Profile Target Mail Settings

Item

Description

Profile ID

Click the drop-down menu to select the identification type for the pro-
file (1 or 2).

Target Mail

Enter the email address of the target client.

Apply

Click 

Apply

 to save the values and update the screen.

Summary of Contents for IS230-10GP









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands