IS230-10GP Industrial layer 2 Switch Web User Guide
109
The
User Status
settings in the ensuing table are informational only: User
Name, Access Right, Auth-Protocol, Priv-Protocol and
Delete
(click to
delete the desired user name).
SNMP Trap
The SNMP Trap page allows you to set the IP address of the node and the
SNMP credentials corresponding to the version that is included in the trap
message.
To access this page, click
Management
>
SNMP
>
SNMP Trap
.
Figure 94. Management > SNMP > SNMP Trap
The following table describes the items in Figure 94.
The
Trap Host Status
settings in the ensuing table are informational only:
No., IP Address, Community Name, Version and
Delete
(click to delete the
desired IP address).
Password
Enter the characters to define the password associated with the
authorization protocol.
Add
Click
Add
to save the values and update the screen.
Table 89. SNMP User Settings (Continued)
Item
Description
Table 90. SNMP Trap
Item
Description
IP Address
Enter the IP address to designate the SNMP trap host.
Community Name
Click the drop-down menu to select a defined community name.
Version
Click the drop-down menu to designate the SNMP version credentials
(v1 or v2c).
Add
Click
Add
to save the values and update the screen.
Summary of Contents for IS230-10GP
