Allied Telesis IE048-480, Installation Manual

Page: 47 / 72

IE048-480 Power Supply Installation Guide
47
Figure 9. Wrapping Wire Strands

For added protection against loose strands, tin stranded wires with
solder or use electric wire ferrules.

Do not route wires on the floor or other areas where they might
pose a hazard.

After installing wires, visually inspect them for exposed wires or
loose wire strands. Refer to Figure 10.
Figure 10. Verifying Wire Installation
Warning
Check to see if there are any exposed copper strands coming from
the installed wires. When the installation is done correctly there
should be no exposed copper wire strands extending from the
terminal block. Any exposed wiring can conduct harmful levels of
electricity to persons touching the wires.
 E12
Correct
Incorrect -
Exposed Wire
Incorrect - Loose
Wire Strands