background image

IE048-480 Power Supply Installation Guide

15

Contacting Allied Telesis

For assistance with this product, contact Allied Telesis technical support 
on the Support & Services section of the Allied Telesis web site at 

www.alliedtelesis.com/support

. You can find links for the following 

services on this page:

24/7 Online Support — Enter our interactive support center to 
search for answers to your product questions in our knowledge 
database, to check support tickets, to learn about Return 
Merchandise Authorizations (RMAs), and to contact Allied Telesis 
technical experts.

USA and EMEA phone support — Select the phone number that 
best fits your location and customer type.

Hardware warranty information — Learn about Allied Telesis 
warranties and register your product online.

Replacement Services — Submit a RMA request via our 
interactive support center.

Documentation — View the most recent installation and user 
guides, software release notes, white papers, and data sheets for 
your products.

Software Downloads — Download the latest software releases for 
your managed products.

For sales or corporate contact information, select your region and country 
and then go to 

www.alliedtelesis.com/contact

.

Summary of Contents for IE048-480









































































Reviews: