Allied Telesis DNC10 Series, Installation And User Manual

Page: 83 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
83
Receive Buffers
Receive buffers are data segments that allow the network adapter to
allocate receive packets to memory.
To specify or change the Receive Buffers feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Receive Buffers in the Property box.
The Receive Buffers page is displayed as shown in Figure 40.
Figure 40. Receive Buffers Page
3. Specify the buffer size in the Value box.
The range of valid receive buffers is 128 to 4096 in increments of 8
with 512 receive buffers as the default value.
4. Click OK .