Allied Telesis DNC10 Series, Installation And User Manual

Page: 73 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
73
Large Send Offload v2 (IPv6)
The Large Send Offload v2 (IPv6) feature allows you to control the load of
sending out large packets. When this feature is enabled, the adapter port
segments large packets for IPv6 traffic and reduces the CPU load.
To enable or disable the Large Send Offload v2 (IPv6) feature, do the
following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Large Send Offload v2 (IPv6) in the Property box.
The Large Send Offload v2 (IPv6) page is displayed as shown in
Figure 33.
Figure 33. Large Send Offload (IPv6) Page
3. Select one of the following options:

Disabled — The adapter does not segment packets
for IPv6 traffic.

Enabled — The adapter port segments large packets
up to 256Kb for IPv6 traffic before sending them out.
This is the default setting.
4. Click OK .