Allied Telesis DNC10 Series, Installation And User Manual

Page: 19 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
19
The basic characteristics of the NICs are listed in Table 1.
Note
The maximum operating distance of the SFP+ port on the DNC10SP
adapter depends on the transceiver. Refer to the product's data
sheet on the Allied Telesis web site for a list of supported
transceivers.
After physically installing the DNC10 Series network adapter in your
computer, install the driver software by referring to Chapter 3, “Installing
the Driver Software” on page 41.
Table 1. DNC10 Series Network Interface Cards
Adapter Port Speed Cable Type
Maximum
Distance
System
Connection
DNC10SP SFP+ 10G/1G Varies by
SFP+
transceiver Varies by
SFP+
transceiver PCIe x4
(Gen 3)
DNC10LC Duplex LC 10G OM1 33m PCIe x4
(Gen 3)
OM2 82m
OM3 300m
OM4 550m
DNC10T RJ45 10G CAT6A 100m PCIe x4
(Gen 3)
5G/2.5G/
1G/100M CAT5e or
CAT6A