Allied Telesis DNC10 Series, Installation And User Manual

Page: 102 / 118

Chapter 4: Modifying Advanced Properties
102
Wake on Magic Packet
The Wake on Magic Packet feature enables the adapter to wake up from a
low-power mode when the adapter port receives a Magic packet.
To enable or disable the Wake on Magic Packet feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Wake on Magic Packet in the Property box.
The Wake on Magic Packet page is displayed as shown in Figure 52.
Figure 52. Wake on Magic Packet Page
3. Select one of the following options:

Enabled — The adapter wakes up from a low-power
mode when receiving a Magic Packet. This is the
default setting.

Disabled — The adapter stays in a low-power mode
when receiving a Magic Packet.
4. Click OK .