Allied Telesis DNC10 Series, Installation And User Manual

Page: 101 / 118

DNC10 Series Network Interface Cards Installation and User’s Guide
101
Wake on Link
This is part of the Wake on LAN feature. The adapter wakes the computer
from a low-power mode when the link state on the adapter's port changes
from no link to link.
To enable or disable the Wake on Link feature, do the following:
1. Access the Advanced Properties.
See “Accessing Advanced Properties” on page 58.
2. Select Wake on Link in the Property box.
The Wake on Link page is displayed as shown in Figure 51.
Figure 51. Wake on Link Page
3. Select one of the following options:

Disable — This feature is disabled. This is the default
setting.

Forced — The adapter wakes the computer when the
status of the port changes from no link to link.
4. Click OK .