Repeater (Hub) Management
26
Ending a Session
You can end a session by selecting the
Quit
option from the Main Menu. This
returns the management agent to an idle, “listening” state and breaks the
communication link. If connected via a modem, the phone circuit will be “hung
up;” if connected via the network, the virtual circuit will be disconnected.
If a local session is not ended using the
Quit
command before the
communication link is broken, the session continues. This prevents initiating
another session (local or Telnet) until the current session is ended or the
timeout duration set in the Password, timeout menu is reached.
Remote (Telnet virtual circuit) sessions will automatically end (quit) when the
virtual circuit is disconnected.
If you have configured a Timeout (see Chapter 4 on page 27), the session will
automatically end if the configured Timeout period elapses without any
keyboard activity.
Note
