Page 21 | AlliedWare Plus™ OS How To Note: Switching
Link Aggregation
Link Aggregation
This section has examples of two ways to aggregate ports together:
z
dynamically using LACP
z
statically, on
page 24
Both examples configure the AlliedWare Plus switch that is shown in the following figure.
How to configure Link Aggregation Control Protocol
(LACP)
Enter Global Configuration mode and enter the command:
awplus(config)#vlan database
This puts you into VLAN mode. To create the VLANs, enter the commands:
awplus(config-vlan)#vlan 2 name vlan2
awplus(config-vlan)#vlan 3 name vlan3
awplus(config-vlan)#vlan 4 name vlan4
1.
Create the VLANs
1.0.3
1.0.2
1.0.4
AlliedWare Plus
Switch
vlan2
vlan3
vlan4
vlan2
vlan3
vlan4
vlan2
vlan3
vlan4
Switch 2
Switch 3
1.0.5
1.0.5
1.0.6
1.0.6
1.0.8
1.0.8
1.0.9
1.0.9
lacp.eps
