Allied Telesis AT+TQm5403, Installation Manual, Page: 51 / 58

AT-TQ5403 Series Wireless Access Point Installation Guide
51
LAN Port Specifications and Pinouts
Port
Specifications
The access point port specifications are shown in Table 10.
Port Pinouts
The pin signal definitions for 10/100 Mbps and 1000 Mbps Ethernet traffic
are given below.
Figure 22 illustrates the pin layout of the LAN ports.
Figure 22. Pin Layout for RJ45 Connector on LAN Port
Table 11 lists the pin signals when the port is operating in the MDI
configuration at 10/100 Mbps.
Table 10. LAN Port Specifications
Connector Specification
Standards - LAN1 and LAN2 IEEE 802.3 (10Base-T)
IEEE 802.3u (100Base-TX)
IEEE 802.3ab (1000Base-T)
PoE standard - LAN1 only IEEE 802.3at (class 4)
Table 11. MDI Pin Signals (10Base-T or 100Base-TX)
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-