Allied Telesis AT-TQ6602, Installation Manual, Page: 32 / 108

Chapter 1: Product Description
32
LEDs
The LEDs on the top panel display status information. They are defined in
Table 1.
Table 1. LED Status Information
LED State Description
Power
Solid Green The access point is powered on and
operating normally.
Solid Red The device is booting up or has
encountered a fault condition.
Blinking Red The access point is upgrading its
firmware.
Off The access point is not receiving
power.
LAN
Solid Green The port has established a link to a
network device.
Blinking Green The port is transmitting or receiving
data.
Solid Amber The LAN port is connected to a PoE+
source device.
Off The port has not established a link to a
network device.
2.4GHz
Wi-Fi
Solid Green The 2.4GHz Radio1 is enabled.
Slow Blinking
Green
The access point is querying the
wireless network on the 2.4GHz radio
for a Smart Connect network of Vista
Manager EX and the AWC plug-in.
Fast Blinking
Green
The access point is in a Smart Connect
network and will automatically
configure its settings from the AWC
plug-in.
Off
The 2.4GHz Radio1 is disabled.