Allied Telesis AT-TQ3600, Installation Manual, Page: 37 / 70

AT-TQ3600 Wireless Access Point Installation Guide
37
Removing the
Bottom Panel
from the Access
Point
To remove the bottom panel from the access point, preform the following
procedure:
1. Place the access point on a table or desk.
2. Open the front panel. Refer to Figure 13.
Figure 13. Opening Front Panel
3. Use a #2 Phillips-head screwdriver to loosen the captive screw that
secures the bottom panel to the wireless access point. Refer to Figure
14 on page 38.