Allied Telesis AT-S82, User Manual

Page: 18 / 72

Chapter 2: Basic Switch Parameters
18
Configuring the IP Address, Subnet Mask, Gateway Address, and
BOOTP or DHCP
This procedure explains how to assign an IP address, subnet mask, and
gateway address to the switch.
To set the switch’s IP configuration, perform the following procedure:
1. From the main menu, select Basic Switch Information .
The Basic Switch Information page is shown in Figure 4.
Figure 4. Basic Switch Information Page
2. To set the switch’s IP address, in the Get IP Address field, choose
one of the following from the list:
Manual - Allows you to enter static IP address information:
a. In the IP Address field, enter the IP address. The default is
192.168.1.1.
b. In the Subnet Mask field, type the subnet mask for the switch. The
default is 255.255.255.0.
c. In the Default Gateway field, type the IP address of the default
gateway. There is no default gateway assigned.