Chapter 3: Installing the AT-MWS600AP or AT-MWS1750AP Access Point
44
Unpacking the AT-MWS600AP or AT-MWS1750AP Access Point
To unpack the AT-MWS600AP or AT-MWS1750AP access point, perform
the following procedure:
1. Remove all components from the shipping boxes.
Note
Store the packaging material in a safe location. You must use the
original shipping material if you need to return the unit to Allied
Telesis.
2. Verify that all components listed in Table 7 are included in your
shipping boxes.
Table 7. Components in the Shipping Boxes
Name
Component
Mounting
base kit
1 x Mounting base
2 x Screw for the
mounting base
(M2.6 9.8mm)
Summary of Contents for AT-MWS1750AP
Page 12: ...Preface 12...
Page 26: ...Chapter 1 Product Description 26...
Page 42: ...Chapter 2 Installing the AT MWS2533AP Access Point 42...