Allied Telesis AT-MMC200/LC, Installation Manual

Page: 65 / 66

MMC2000/200 Series Mini Switching Media Converter Installation Guide
65
6. Use scotch tape to attach the template on the wall.
7. Pre-drill four 3/16” (5mm) holes at the locations on the templates as
shown in Figure 38.
Figure 38. Placing the Template on the Wall
8. Remove the template from the wall.
9. Install four plastic anchors included with AT - MMCWLMT Kit into the
wall, at the holes you drilled in the previous step.
10. Secure the media converter unit to the wall using four wall-mounting
screws. See Figure 39 on page 66.