AT-MCF106xx
and AT-MCF112xx Installation Guide
21
5. Insert the three screws provided with the unit and tighten with a suitable
screwdriver, as shown in Figure 9.
Figure 9. Installing the Mounting Bracket
6. Repeat Step 4 and Step 5 to install the remaining bracket on the other
side of the unit.
7. Insert the unit into a 19-inch rack and secure with suitable screws (not
provided).
Note
To ensure adequate cooling, there should be a minimum of 1 centimeter
(0.39 inches) of ventilation space between the unit and any other device
installed in the rack.
8. Plug the power cord into the back of the unit and plug the other end of the
power cord into a power outlet. If you installed an optional redundant
power supply, plug its power cord into the power supply and the other end
into a power outlet.
Caution
When connecting a power cord, you should always plug the power cord
into the media converter first. Only after it has been securely installed
should you plug the power cord into a power source.
Warning
Power cord is used as a disconnection device:
To de-energize
equipment, disconnect the power cord.
10
If you installed an optional redundant power supply, you should connect
