Allied Telesis AT-IFS802SP/POE, Installation And User Manual, Page: 44 / 105

40 AT-IFS802SP/POE(W)-80 User Manual
6.12 User Authentication
Change web management login user name and password for the management security issue.
User name • : Type in the new user name (The default is ‘root’)
Password •
: Type in the new password (The default is ‘root’)
Confirm password • : Re-type the new password
And then, click •
Apply
User Authentication interface
6.13 Port Statistics
The following chart provides the current statistic information which displays the real-time packet
transfer status for each port. The user might use the information to plan and implement the network,
or check and find the problem when the collision or heavy traffic occurs.
Port • : The port number.
Type •
: Displays the current speed of connection to the port.
Link • : The status of linking—‘Up’ or ‘Down’.
State •
: It’s set by Port Control. When the state is disabled, the port will not transmit or receive
any packet.
Tx Good Packet • : The counts of transmitting good packets via this port.
Tx Bad Packet •
: The counts of transmitting bad packets (including undersize [less than 64 octets],
oversize, CRC Align errors, fragments and jabbers packets) via this port.
Rx Good Packet •
: The counts of receiving good packets via this port.
Rx Bad Packet • : The counts of receiving good packets (including undersize [less than 64 octets],
oversize, CRC error, fragments and jabbers) via this port.
Tx Abort Packet • : The aborted packet while transmitting.
Packet Collision • : The counts of collision packet.
Packet Dropped •
: The counts of dropped packet.
Rx Bcast Packet • : The counts of broadcast packet.
Rx Mcast Packet •
: The counts of multicast packet.
Click button to clean all counts. •
Apply